آلة القياس والفحص للمواد غير المرنة - موديل B01.41

آلة القياس والفحص موديل B01.41 لمراقبة الجودة للمواد

الشركة المصنعة: ش.ذ.م.م رولتكس
السعر: طلب عرض سعر

أسعار الجملة متاحة

شروط FOB و CIF و EXW متاحة

الوصف

هذا textile processing equipment مصنوع في روسيا ومتاح للاستيراد إلى الأسواق العالمية. المنتجات الروسية معروفة بمتانتها وموثوقيتها ونسبة السعر إلى الأداء الممتازة.

للحصول على مواصفات المنتج التفصيلية، يرجى الاطلاع على علامة تبويب المواصفات. اتصل بفريقنا لطلب معلومات الأسعار والتوافر والشحن.

المواصفات

Mark
Rolltex
Maximum bale diameter
400 mm
Maximum bale weight
60 kg
Electronic programmable counter for material length measurement
The electronic meter meter allows you to: use conversion factors that allow you to increase the accuracy of measuring materials of different densities and stretching; - non-volatile power supply of the meter ensures the preservation of the worked
Automatic material stretch tracking system
Stretch control function, allows rewinding and accurate metre measurement of slightly elastic materials.
View screen
The viewing screen is equipped with LED backlight. The height of the viewing screen is 560 mm. The viewing screen tilt angle is 16º.
Touch screen rotary operator panel
the machine is controlled from the operator's touch panel, which is designed in Russian.
Foot-operated rear and front foot controls
The foot pedal is necessary for easy filling of the machine. the rear pedal switches on the drives of the unwinding rollers. the front pedal is used for switching on and off the drives in the machine in case of defects or other technological reasons.
Rewinding scheme
from a cylindrical roll wound on a cardboard bobbin into a cylindrical roll wound on a cardboard bobbin with an outer diameter of at least 40 mm.
Reverse (Reverse)
The backstroke function is used for rewinding back the material in case of a missed/clarified defect or if the residual material has been rewound into a roll.
Machine stop sensor at the end of the bale
the bale end sensor is necessary to increase the measuring accuracy. upon opening the bale end sensor, the machine resets the rewind speed to 5 m/min and the operator finishes the rewind at a low rewind speed.
Additional unwinding axis for handling non-cylindrical bales on the cardboard bobbin inside
The axle is necessary for working with non-cylindrical bales on the bobbin. when using the "axle rewind" function, the machine automatically switches off the drive of the unwinding rollers in order to save energy consumption.
Maximum electrical power consumed by the machine
1 kV
Mains power supply
220 V
Passport, operating and maintenance instructions
supplied with equipment
Automatic bale edge equalization system
function ensures that the edge of the material roll is aligned to the base side (except for curled edge webs).

ملاحظة: جميع المواصفات مقدمة من الشركة المصنعة وقد تخضع للتغيير. يرجى الاتصال بنا لتأكيد أحدث المواصفات قبل تقديم طلبك.

وفر وقتك

شارك متطلباتك للحصول على رد سريع!

رد فوري خلال 15 دقيقة
أفضل أسعار الجملة مضمونة
مباشرة من الشركة المصنعة

التسليم والدفع

شروط الشحن

FOB نوفوروسيسك، روسيا CIF متاح للموانئ الرئيسية في جميع أنحاء العالم EXW منشأة الشركة المصنعة، روسيا

وقت التسليم

الشحن البحري: 30-60 يوم (حسب الوجهة) الشحن الجوي: 14-21 يوم (للطلبات العاجلة)

طرق الدفع

خطاب الاعتماد (L/C) التحويل البنكي (T/T) خدمات الضمان

منتجات مماثلة قد تهمك

موردون موثوقون

جميع المنتجات يتم الحصول عليها مباشرة من المصنعين الروس المعتمدين

ضمان الجودة

المنتجات تلبي معايير الجودة الدولية مع الشهادات المناسبة

الشحن العالمي

حلول لوجستية موثوقة لتوصيل المنتجات إلى موقعك

مدفوعات آمنة

خيارات دفع آمنة متعددة لتسهيل المعاملات الدولية

تم استلام طلب معاودة الاتصال. سنتصل بك قريباً.