Adjustable Single Student Desk FrPU3.1.3-5 for Enhanced Learning Experience

The frame of the table has a welded construction of 2 bent supports made of 45x25x1,5mm flat-oval pipes and traverses 30x15x1,5mm and has 2 bent adjustable lower support legs made of 40x20x1,5mm flat-oval pipe.There are 4 holes in the 45x25mm pipe.There is a plastic transition sleeve for rigidity when fixing the pipe in the pipe.The lower leg has 2 holes with threaded rivets M8 inserted in it.At the bottom of the table leg, on the outside of the bend there is a support corner made of a metal plate 107x13x1,5 mm.On each support two plates are welded on top and behind the support, the size of 30x35x2 mm with a through hole for fixing the lid and the table kingdom.2 hooks.All visible holes are welded on the top and back of the support. All visible holes in the pipe are covered with plugs.To the metal corner, on the outer side of the bend of the support leg of the table, a plastic corner support 110x95x25mm is fixed, and on the front edge is a plastic tip 65x45x25mm.The frame is painted with powder paint.The lid LDFP 22mm with rounded edges(R-50mm).The headboard LDFP 16mm.