Pupil's table FrPU3.2.5-7 (two-seater, adjustable)

The frame of the table has a welded construction of 2 supports consisting of a 45x25mm thick 1.5mm thick flat-oval tube and welded together with 2 crossbeams of a 30x15mm thick 1.5mm thick flat-oval tube.To the crossbeams in the middle of the frame is welded a suspension support made of 40x20mm pipe 1.5mm thick, and has two bent adjustable lower support legs made of 40x20mm flat-oval pipe 1.5mm thick.The tube 45x25mm has four holes and is equipped with a plastic transition tube for rigidity when fixing the tube in the tube.At the bottom of the table leg on the outside of the bend is welded a support angle plate for further fixation of the plastic support.On each support is welded two plates from the top and back of the support, on the hanging support two plates from the top.Plate size 30x35mm thick 2mm with a through hole.2 hooks.All visible holes are welded on the bottom of the table leg. All visible holes in the pipe are covered with plastic plugs.The frame is powder coated.The cover is LDPE 22mm with rounded edges (R-50mm).The headboard is LDPE 16mm.