Student Chair AGAT 01.02.01.06 for Classroom Comfort and Support

The frame is made of 2 flat-oval tubes of 40x20x1.5mm cross-section of L-shape. Each tube has a welded plate 80x30x2mm for fastening the back of the chair. The base of the seat frame consists of a 30x15x1.5 mm U-shaped flat-oval pipe welded between the supports.

2 plates 40x30x2 mm are welded on each side of the seat frame base to fix the seat. The lower supports are connected by a welded joint and a crosspiece made of a 30x15x1 mm flat-oval pipe. All pipe ends are closed with plastic plugs.

A plastic corner support 110x95x25mm is attached to the metal corner on the outside of the chair leg bend. 65x45x25mm plastic lugs are put on the front edge of the metal supports. The corner support and the lug are fixed with self-tapping screws3,9x19mm.The frame is painted with powder paint.

The seat and back of the chair are made of polypropylene.