Teacher's Desk with Perforated Beam - Model FrStP 2.14 for Classrooms

Side supports are L-shaped, consist of a metal pipe with a diameter of 40 mm and thickness of 1.2 mm and a crosspiece made of a profile pipe with a cross-section of 40x25 mm and thickness of 1.5 mm. On the side supports in the area of the lintel a crossbar 40x25mm 1.5mm thick is welded. In the rear part of the frame to the two supports two crossbeams of metal flat-oval pipe with a cross-section of 30x15mm with a thickness of 1.5mm are welded to pipes with a diameter of 40mm and on each side there are two plates 35x30mm with a thickness of 2mm with round holes for further fastening of the kingdom with M6 screws.

The legs of the table frame are fitted with an adjustable support with a swivel joint. It is designed for a pipe with a round cross-section with a diameter of 40 mm. It has a round base with a diameter of 80 mm.

The angle of inclination is up to 45°. All visible holes in the pipe are covered with plastic plugs. The frame is painted with polyester powder paint.

LDPE cover 22mm. The table cover has a plug with a hole for wires. Tsarga made of metal, thickness of 1 mm.