Vertical diagonal pump 96DV-4,5/23MK-I-TM3

Designed for pumping water with total mineralisation (dry residue) not more than 1,5g/l, with temperature from 274 to 308K (from 1 to 35 deg C), with content of chloride ions not more than 200mg/l, sulphates - not more than 600mg/l, hydrogen pH from 6.5 to 9.5 with mass concentration of suspended particles not more than 3 g/l (0.3%), size up to 0.1 mm, of which abrasive particles not more than 2%, microhardness not more than 10000 MPa. The connection of pump and motor shafts is rigid flange connection, made at installation and carried out through a spacer shaft. The direction of rotation of the rotor is anti-clockwise when the pump is viewed from above.

The main parts and assemblies of the pump are: casing parts, impeller, guide bearings, shaft, spacer shaft and vane turning drive. The design of the casing parts allows the impeller to be dismantled without disturbing the alignment of the complete pump and motor assembly. The pumps allow higher heads than axial flow pumps.