Wardrobe Hanger with Cabinet ATT-P1 for Organized Storage Solutions

The lid and drawers should be made of MDF 25mm thick shaped, facade 19mm On the outer sides of the three-layer enamel coating with anti-vandal special effect colour NSC gloss not more than 10% (matte finish). ). The frame must be made of 16mm thick E1 class LDF and the shelves must be 25mm thick.

The ends of the cabinet body shall be covered with 2mm thick PVC edging. The rear wall shall be made of LDF of the same colour as the cabinet. The interior space shall be divided in half by a shelf made of 16mm chipboard.

The cabinet shall have a base system on adjustable mortise feet, The cabinet shall be equipped with two hinged fronts (sashes). The cabinet is supported by a 16mm thick substrate and is rigidly fixed to the wall with appropriate anchors depending on the wall material. At a height of 1900mm from the floor there is a 25mm thick shelf made of LDFP of emission class E1 for hats.

On the wall panel there are 6 hooks for outerwear, colour - matt chrome.