Dining Table AGAT 01.06.05 - Perfect for Modern Dining Spaces

Welded frame. Square tube 50x50x1.5mm connects the base of the frame and the plate under the table top. The base of the frame is a sheet of hot-rolled metal 6.0mm thick, with dimensions 450x450mm.

The plate under the table top - a sheet of hot-rolled metal 3.0mm thick, dimensions 300x300mm with four holes with a diameter of 7mm for fixing the table top through m6x12 screws in the futork. To the base on the side of the floor there are felt pads to compensate for unevenness and also to avoid scratching of the floor surface by the metal base of the frame. The height of the frame is 728mm.

Application of polymer powder on the grounded product in an electrostatic field with subsequent curing at T - 180-200°?. The table top is made of chipboard with a coating of laminated paper or with a coating of polymer with added sand (artificial stone).