Double Student Desk with 16mm Laminated Surface for Classrooms

The table top and front panel of the table are made of 16mm LDFP. The ends of the table top are covered with 2mm thick PVC edgebanding. The ends of the front panel are covered with 0.5mm thick PVC edgebanding.

The metal frame is made of 25x25 mm square section profile with wall thickness not less than 1.2 mm and covered with powder paint resistant to chemical and mechanical influences. The free ends of the pipes are fitted with plugs made of impact-resistant polymers. The frame of the table has polymer feet to prevent damage to the floor covering.

All fixing fittings on the metal frames are hidden inside the pipe to extend the life of the product. The front fixing on the table top is concealed (threaded bushings and M6 bolts). Rear fixing on the table top is through (furniture bolt with nut).

The front panel is attached to the frame by furniture bolts with nuts. There are 2 briefcase hooks in the design. The table is colour coded according to the height group.