Medical Bed KOM-02-1 for Hospitals and Home Care Applications

Medical metal bed, collapsible, with a section for lifting the head. It consists of two metal backrests and a bed with a net, the backrests and bed are connected by wedge clamps. The backrests of the bed are U-shaped made of Ø32 mm metal pipe (wall thickness - 1.5 mm), with four vertical inserts made of 15x15 mm square profile pipe, the height of the backrests is 800 mm, plastic plugs are inserted into the legs.

The bed consists of a frame and a mesh welded to it, in the head area there is a lifting section (headrest) with fixation in four positions, maximum lifting angle 40°, headrest length 810mm. The headrest is lowered by means of a handle. The frame is made of a U-shaped profile (metal thickness 2 mm) with two metal crossbars in the form of an angle (metal thickness 2 mm), welded mesh with cells of 50x100 mm, made of a steel bar with a diameter of 4 mm.

Height from the floor to the upper edge of the base 445mm, length of the sleeping place 1950mm, width of the sleeping place 445mm. Covered.