Pupils table AGAT 01.03.07.02 single-seat. adjustable.

The frame of the table has a welded construction of 2 supports consisting of a 45x25x1,5mm flat-oval tube and 2 crossbeams of 30x15x1,5mm, as well as lower legs of 40x20x1,5mm tube.The 45x25mm tube has 4 holes for height adjustment and is equipped with a plastic sleeve when fixing the tube in the tube.2 A support corner made of a metal plate 107x13x1,5 mm is welded at the bottom of the table leg, on the outer side of the bend. 2 hooks. All visible holes in the pipe are closed with plastic plugs.To the metal corner, on the outer side of the bend of the support leg of the table, a plastic corner support 110x95x25mm is attached, and on its front edge is a plastic tip 65h45h25mm.The frame is painted with powder paint.The cover LDFP 22mm.The end surfaces of the table top, pencil case covered with polypropylene 5 mm thick.Polypropylene edge and pencil case are made by casting, tightly fit and repeat all the contours of the table top.The headboard LDFP 16mm with an anodised aluminium profile insert.