Working Desk with Pull-Out Panel ATT-O1 for Efficient Workspace

Top: should be made of MDF 25mm thick shaped, On the outer sides of the three-layer enamel coating with anti-vandal special effect colour NSC 2005-Y70R gloss not more than 10% (matte finish). ). The enamel should meet the following characteristics according to GOST 54586-2011, ISO-15184-1998, ISO-11341-2004, ISO-4211-2012 (hardness not less than 6H, scratch resistance not less than -1,5N, colour change /lightfastness/ not less than - 0,39DE, resistance to chemically active liquids not less than - after 16 hours 5 points without surface change).

Supports should be made of 22 mm thick LDF of emission class E1 and 16 mm thick of the headboard. The ends of the table body shall be covered with 2mm thick PVC edging. The table shall have mortise adjustable supports.

The table has a pull-out panel on ball rails under the keyboard. The table should have such a design that on the external visible parts of the table was not visible fasteners.