3D Printing System with Three Printers RF1 for Efficient Production

Additive material extrusion plants

STEP, STP, STL, g-code

Plus 25 plus/minus 10 degrees (UHL 4 according to GOST 15150)

621 kg

3.5 kW

230 V

Доступ к системе управления через веб-браузер

Ethernet (RJ45)

proprietary MES system

1.75 mm

65

80 °C

400 °C

150*

Protected 54cm (21') industrial touch screen monitor

Yes; 2MP, focal length depends on installed lens

When the reel runs out of material, the sensor will activate, printing will pause, the remaining material will be unloaded from the print area and refilling will begin from an alternate cell that already has the required material refilled.

Up to 8 coils of 3kg each are connected to each print zone simultaneously

3 pcs

1 pcs

All-metal with vacuum clamping and auto-change of work table

1250x1000x1980

250x400x250

Material extrusion (FFF/FDM)

0.0125 mm

ABS;ASA;HIPS;Nylon;PS;PLA;PVA;SBS;PETG;TPU

0.8 mm

4-point automatic; 20-point automatic with MESH correction factors.

Armoured glass

no