Multiphase Flow Meter MR 100x105, Model YMGI.407279.002

Available for Import

Multiphase Flow Meter MR 100x105 for Accurate Density and Flow Measurement

Fluid Measurement Devices

Manufacturer: IZHEVSK MOTOR PLANT "AXION-HOLDING" OJSC

Price: Request Quote

Bulk pricing available

FOB, CIF & EXW terms available

Email Inquiry

Available Models

Multiphase flowmeter MR 100x105 YUMGI.407279.001

Description

Multiphase multiphase flowmeter-density meter MR 100x105 is designed to control flow rate and density of working medium (water, oil products, gel, gel with proppant and chemical additives, inhibited 20% hydrochloric acid solution) without separation of fractions when it is fed from the manifold into the well. The method of flow density measurement is performed by panoramic meters of amplitude-frequency characteristics. A continuous signal from generators is fed into resonators through which the working fluid passes. The resonant frequency of the resonators varies in proportion to the flow density. From the flux density, the phase ratio is calculated. Advantages: -Because of absence of moving protruding parts the flowmeter is least exposed to solid particles (proppant) with linear helium -Measurement results do not depend on pressure and temperature -No influence of device parts on the flow, no pressure losses -Source of radioactive radiation is excluded from the design

Specifications

Name

Control and measuring instrument for oil and gas industry

Service life

20 year

Average MTBF

64000

Warranty period from the date of commissioning

2 year

Weight

550 kg

Height

600 mm

Width

600 mm

Length

1100 mm

Power consumption

100 W

DC voltage

24 V

Storage temperature

-40...60 °C

Degree of protection of electrical equipment according to GOST 14254-96

Not lower than IP 66

Ground ambient air temperature

-40...40 °C

Temperature of the medium

0...60 °C

Explosion protection of the sensor housing

1ExdbibIIBT5GbX

Data exchange protocol

Modbus RTU

Communication interface

RS-485

Coupler connection

Type Hammer Union Fig. No. 1502

Density of the medium

Up to 1.6 t/m³

Permissible relative error of working liquid measurements by density

-0.15...0.15 %

Permissible error when measuring the volumetric flow rate of a liquid

-0.5...0.5 %

Range of propane flow rate per cubic meter of helium

0...2.4 t

Liquid mass flow measurement range (m³ / min)

0,25 to 16

Test pressure

157.5 MPa

Maximum pressure of the medium

105 MPa

Nominal diameter of manifold pressure tube

100 mm

Note: All specifications are provided by the manufacturer and may be subject to change. Please contact us to confirm the latest specifications before placing your order.

Save Your Time

Share your requirements for a quick response!

Looking for

Quantity

Your mobile

Instant response in 15 minutes

Best wholesale prices guaranteed

Direct from manufacturer

Delivery & Payment

Shipping Terms

FOB Novorossiysk, Russia CIF Available to major ports worldwide EXW Manufacturer's facility, Russia

Delivery Time

Sea freight: 30-60 days (depending on destination) Air freight: 14-21 days (for urgent orders)

Payment Methods

Letter of Credit (L/C) Wire Transfer (T/T) Escrow Services

Categories

Language

Quick Links

Multiphase Flow Meter MR 100x105 for Accurate Density and Flow Measurement

Available Models

Description

Specifications

Share your requirements for a quick response!